HOW TO FLASH OFFICIAL STOCK ROM [MARSHMALLOW] ON COOLPAD NOTE 3 LITE

HEY GUYS,

here is the OFFICIAL MARSHMALLOW rom for coolpad note 3 lite☺

Follow the instructions carefully to avoid any damage to your phone.

Disclaimer : Please Do it at your own risk.i am not responsible if anything goes wrong or you  ruin/brick your phone. rooting voids warranty.

INSTRUCTIONS :-

1)Download the V10 marshmallow file using this link and extract it.

   https://drive.google.com/file/d/0B3ZHlQ_VXdARUUhkN21zUlM2UGM/view?usp=drivesdk

2)Download both Drivers and install them

   https://drive.google.com/open?id=0B92f1G7iMBQ2bThaRGhyODNQRjQ

   and

   https://drive.google.com/open?id=0B92f1G7iMBQ2OXFSQ2Y3Y3ZMcG8

NOTE - Installation of both DRIVERS is MANDATORY. If already done then skip this step.

3)Download SP flash tool and extract zip.

   https://drive.google.com/open?id=0B65eoTkiOXvPcVFqUVhSTXhhVUU

4)now open the SP flash tool.

   now click on SCATTER LOADING and select scatter file from downloaded stock rom.

   now click on DOWNLOAD.

   NOTE- dont connect phone to pc before clicking on DOWNLOAD button and make sure that usb debugging is on. if not then enable it by Setting>developer option>tick on usb debugging

   

   now it is time to switch off your phone and connect to pc.

   wait till the green popup appears.

   now disconnect your phone and reboot☺.

Additional Step (Not mandatory)-

  -Don't Reboot into Normal mode.

  -You have to directly go to "Recovery Mode" by pressing Volume up + Power Button Simultaneously

   -Now recovery icon appears on screen. press Volume up + Power button again.

   -select wipe cache parition.

VOILA you are on Marshmallow Now☺

Video tutorial : https://www.youtube.com/watch?v=THRoUp7cYC4

(this video is for coolpad note 3, but process is same)

For any queries COMMENT below....